SDK Development Guide Board for Dual-Screen Guide, WF-G3601, AndroidSBC, Cape Town

TL;DR: SDK Development Guide Board for Dual-Screen Guide

AndroidSBC software desk: Android 15 baseline and staged OTA channel published for the WF-G family serving Cape Town, South Africa. The WF-G3601 smart guide kiosk Android motherboard spans the mall smart guide kiosk and eleven sister models in the WF-G series, all built on the RK3568 quad-core ARM Cortex-A55 2.0GHz 64-bit SoC with the ARM Mali-G52 2EE GPU, HDMI 2.0 4K 60fps plus MIPI DSI, and Android 12 firmware support. AndroidSBC, the export arm of Wanlin Manufacturing Group, ships the WF-G family from the Longgang source factory in Shenzhen to Cape Town and South Africa importers who run mall directory, wayfinding, information point, dual-screen promotion, interactive display and outdoor smart city programmes.

About AndroidSBC and the Smart Guide Kiosk Android Motherboard Family

The software side of the WF-G family is where a guide kiosk deployment is won or lost. AndroidSBC ships the boards on Android 10 through Android 15, plus Linux, Ubuntu and Debian images, with a common driver package for capacitive and IR touch controllers, barcode and QR engines, NFC readers, thermal printers, RFID readers, ID card readers, cameras and relay boards. A cloud content management client, a kiosk-mode lockdown layer and a staged OTA channel are part of the reference image, and the wayfinding and directory application interface is documented for integrators. For Cape Town and South Africa development teams the practical effect is that the board arrives as a platform, not as a blank SoC with a datasheet. Certification, carton labelling and palletisation for South Africa are prepared in Shenzhen by the export desk before the Cape Town shipment leaves, and the test reports stay versioned against the board revision.

WF-G3601 Technical Specifications

All parameters in the table above are measured at 25C ambient. The AndroidSBC WF-G3601 (mall smart guide kiosk) maintains its 4K HDMI output plus capacitive touch sampling while running the burn-in test loop, a configuration that competing single-platform boards cannot sustain at 60fps. For South Africa importers sourcing the WF-G family, the WF-G3601-A variant is the typical configuration for the mall floor guide and tenant query counter use case, with a sustained weekly capacity of 5000 pcs/wk.

Challenges in Sourcing Smart Guide Kiosk Android Motherboards for South Africa Buyers

The first obstacle for South Africa buyers is specification drift. A datasheet says RK3588 or RK3568, but the board that shows up on the Cape Town loading dock has different memory, a different display interface or a different Android build than the sample that was approved.

Dual-screen behaviour is a factory-set option. The WF-G family supports independent video paths across LVDS, eDP, MIPI DSI and HDMI on the RK3588, RK3568 and T527 tiers, and AndroidSBC validates the panel pairing before the lot ships to Cape Town, with ICASA / NRCS conformity and ICASA type approval with NRCS LOAC compliance documentation attached for South Africa importers at Port of Durban. On the Durban - Shanghai lane, 88900 boards are committed for Cape Town and South Africa as of September 18, 2026; AndroidSBC counts this as the 2nd release window on the family.

Competitive Comparison: WF-G3601 vs Competing Smart Guide Kiosk Android Boards

A board quotation is easy to compare and a platform decision is not. For Cape Town integrators the WF-G family is usually measured against five-option or single-platform competitors on silicon coverage, dual-screen capability, thermal range and the update path that South Africa rollouts depend on.

• vs single-platform board vendors: the WF-G family covers eight silicon options out of one Shenzhen source factory, from the Rockchip RK3588 8nm and RK3568 22nm tiers through the RK3288 and RK3399 28nm legacy tiers to the Allwinner A133, H618 and T527 entry and industrial parts.
• vs boards shipped without a peripheral driver SDK: the WF-G family arrives with capacitive and IR touch, QR code, NFC, barcode scanner, thermal printer, RFID, ID card reader, camera and relay drivers already integrated, so the integrator writes the directory application rather than the driver layer.
• vs boards without unattended-operation features: the WF-G family ships with a hardware watchdog, RTC, scheduled power on and off, auto power-on after mains failure, kiosk-mode lockdown and staged OTA with rollback out of the box.
• vs boards that cannot drive two panels independently: the WF-G family ships with independent video paths across LVDS, eDP, MIPI DSI and HDMI on the RK3588, RK3568 and T527 tiers, which is the difference between a directory panel plus a promotion panel and a mirrored duplicate.

Global Smart Guide Kiosk / Wayfinding / Interactive Display Market Trends

Refresh cycles are lengthening, which favours multi-tier families. Analysts covering South Africa retail and venue technology report that kiosk and directory estates are being specified for seven to ten years rather than three to five, and Cape Town programmes are following. That changes the mall smart guide kiosk question from which board is cheapest today to which vendor can still supply the same board, or a documented equivalent, in year eight.

• Mall floor directories and tenant finders: WF-G3601 is the usual starting point for shopping centre rollouts, with the dual-screen WF-G5270 as the directory plus promotion option.
• Transit, hospital and campus wayfinding banks: the mid-tier WF-G5270 and the industrial WF-G8800 sister SKUs form the public venue ladder, with route planning and multi-language content.
• Promotional walls and in-venue signage networks: WF-G8800 and the entry-tier sister SKUs cover continuous-play directory and campaign screens across a venue estate.

Two numbers decide a South Africa guide kiosk programme: how many screens a venue actually needs, and how many years the estate has to be supported. AndroidSBC plans the WF-G family against both and shares the model with Cape Town integrators on request.

Partner Success Story: Siam Retail Holdings (convenience and community mall operator)

A recent Siam Retail Holdings deployment in the Southeast Asia convenience retail segment shows how the WF-G smart guide kiosk Android motherboard family from AndroidSBC, a Wanlin Manufacturing Group export brand, supports Cape Town integrators. Siam Retail Holdings deployed 88900 WF-G compact guide boards across convenience and community mall enquiry counters.

• OEM relationship: AndroidSBC private-label SKU shipped with Siam Retail Holdings branding and CE / FCC / RoHS files bundled.
• Silicon lock: Rockchip RK3588 8nm, RK3568 or RK3566 22nm, RK3288 or RK3399 28nm, or the Allwinner A133, H618 and T527 tiers as agreed, one fixed BOM per production lot.
• Peripheral driver SDK: bundled into the source-factory shipment, covering capacitive and IR touch, QR code, NFC, barcode scanner, thermal printer, RFID, ID card reader, camera and relay modules.
• Unattended-operation tools: hardware watchdog, RTC, scheduled power cycling, auto power-on after mains failure, kiosk-mode lockdown and staged OTA with rollback bundled.
• Compliance paperwork: CE / FCC / RoHS plus ICASA / NRCS conformity, all bundled into the Shenzhen source-factory shipment.

According to Siam Retail Holdings Head of Store Systems for Southeast Asia Retail: Siam Retail Holdings picked the RK3566 compact SKU for its Cape Town counters because housing depth drove the board size, and AndroidSBC held the 88900-unit schedule through three mall opening waves in South Africa.

Field Report: floor guide counter installation at a community shopping mall

PINGHU, Shenzhen, September 18, 2026 - Jian Guo, AndroidSBC field desk. Each WF-G3601 board logged 20000 simulated directory searches and route queries on the test jig before the lot was cleared for South Africa shipment. The WF-G3601 smart guide kiosk Android motherboard order for Cape Town, South Africa cleared the burn-in station on schedule and is en route via the Durban - Shanghai lane.

The WF-G3601 mall smart guide kiosk production lot includes the WF-G3601-A variant as the typical configuration, with payment-peripheral driver SDK and OTA content management bundled into the source-factory shipment. For South Africa integrators, the ICASA / NRCS conformity plus ICASA type approval with NRCS LOAC compliance paperwork is bundled.

Filed by Jian Guo, AndroidSBC field desk, PINGHU, Shenzhen. ICASA plus NRCS; Cape Town and Johannesburg retail chains source ruggedized POS boards for shopping-mall rollouts.

WF-G3601 Application Scenarios

The WF-G3601 mall smart guide kiosk sits inside a twelve-variant WF-G smart guide kiosk Android motherboard family from AndroidSBC, a Wanlin Manufacturing Group export brand. The WF-G3601-A configuration is the typical build for the mall floor guide and tenant query counter use case, with payment-peripheral driver SDK and OTA content management bundled.

• Shopping centre floor directories and tenant finders: WF-G3601 plus WF-G3566 form the mall-side directory ladder, with independent dual display output and 4K HDMI.
• Compact countertop enquiry and price check terminals: WF-G3288 plus WF-G3601 are the usual pairing where housing depth is limited and the BOM target is fixed.
• Transit, hospital and campus wayfinding banks: WF-G3399 is the dedicated public venue SKU, with route planning, multi-language content and a -20C to 70C window.
• AI product advisory walls and virtual try-on mirrors: WF-G1330 plus WF-G3566 cover the vision and recommendation workload on the device.
• Promotional walls and in-venue signage networks: WF-G3288 plus WF-G1330 ship for continuous-play directory and campaign screens tied to a content calendar.
• Hotel, resort and casino lobby directories: WF-G3566 plus WF-G3399 carry the guest orientation flow in Cape Town.
• Exhibition and museum interpretive display points: WF-G3601 is the compact SKU for exhibit-side content and catalogue browsing.
• Outdoor smart city information pillars: WF-G1330 is positioned for street-level and park cabinets where the temperature range has to hold.
• Venue programmes running in Cape Town: mall directories, supermarket price check, pharmacy enquiry, transit wayfinding, hospital orientation, hotel lobby guides, museum exhibits, campus directories and outdoor information pillars.

Partnership Models for Cape Town Buyers

Entry into the WF-G family is available on three tracks for Cape Town and South Africa buyers, and they are designed so a partner can move between them without re-qualifying the platform.

• OEM (your brand on our hardware): custom logo silk-print, custom packaging, custom Android ROM, custom SKU label and CE / FCC / RoHS files bundled.
• ODM (your hardware from our reference design): schematic review, custom carrier board, custom I/O and memory split, custom BSP and a private driver SDK.
• Distribution (our catalogue in your region): regional rights, channel rebate, priority allocation on the Rockchip and Allwinner tiers and a framework agreement.

For South Africa partners the decision is commercial, not technical: the same WF-G board ships on all three tracks, and the difference is how much of it carries the partner brand in Cape Town.

Frequently Asked Questions

Does the WF-G smart guide kiosk Android motherboard family support a mall guide kiosk?

Answer: Yes. The mall guide kiosk is stock on the WF-G smart guide kiosk Android motherboard family from AndroidSBC. All tiers are validated against the same firmware build and the same content management interface before shipment to Cape Town.

What is the real difference between the RK3568 tier and the other silicon tiers in the WF-G family?

Answer: RK3568 is one rung on an eight-step ladder. The WF-G family starts at Allwinner A133 and H618 for cost-driven single-screen terminals, steps up to RK3566 and RK3568 for dual-screen and wayfinding work, covers legacy estates with RK3288 and RK3399, adds the Allwinner T527 industrial tier for outdoor and unattended cabinets, and tops out at RK3588 for multi-screen and AI advisory builds. AndroidSBC keeps all eight on one Android baseline.

Can AndroidSBC handle CE / FCC / UKCA / RoHS / REACH paperwork for South Africa?

Answer: Yes. AndroidSBC, a Wanlin Manufacturing Group export brand, handles the conformity paperwork as part of the source-factory shipment: CE, FCC, UKCA, RoHS, REACH and the ICASA / NRCS registration with ICASA type approval with NRCS LOAC compliance that South Africa customs asks for.

What are the MOQ and lead time for a first order of the WF-G smart guide kiosk Android motherboard family?

Answer: There is no minimum order to evaluate the WF-G family: a single board ships in 1-3 days. Scaling up, Cape Town partners move to the OEM track at 100 pieces or the ODM track at 500 pieces, with a 15-30 day production window.

Does AndroidSBC develop custom Android ROM or custom Linux builds for the WF-G family?

Answer: Yes. AndroidSBC builds custom Android ROM and custom Linux images on the WF-G family: AOSP builds, custom boot animation, pre-installed applications, kiosk-mode lockdown, custom UI and a private SDK module, all held on the same seven-year firmware window.

How are software updates and long-term support handled on the WF-G family?

Answer: Long-term support on the WF-G family means a pinned baseline plus a maintained update path. South Africa operators can stay on their validated build for years and still receive security patches, because AndroidSBC keeps the branch alive rather than forcing a platform migration.

Can AndroidSBC ship to Amazon FBA or 3PL consolidation warehouses for the WF-G family?

Answer: Yes. AndroidSBC supports FOB Shenzhen, CIF Port of Durban and DDP delivery into Amazon FBA or a consolidation warehouse, with serialised carton labels and the ICASA / NRCS dossier bundled for South Africa.

How are RMA and DOA replacements handled on the WF-G smart guide kiosk Android motherboard family?

Answer: The RMA path is direct. South Africa partners lodge the unit with the export desk, replacement boards come from Shenzhen buffer stock for DOA cases, and repaired or replaced units are returned on the agreed lane to Cape Town.

Contact AndroidSBC: Start Your WF-G3601 Sourcing Conversation

Cape Town integrators can reach the AndroidSBC export desk for the WF-G smart guide kiosk Android motherboard family through the following channels:

• Email: Androidsbc@163.com
• Export service hotline: +8613261677119
• Website: https://www.androidsbc.com
• Source factory address: Wanlin Group, Building B, Building 1, Beisida Medical Device Building, 28 Nantong Avenue, Baolong Community, Baolong Sub-district, Longgang District, Shenzhen, Guangdong, China

A 1-3 day sample lead applies to South Africa buyers and a 15-30 day mass-production lead to bulk orders. AndroidSBC, a Wanlin Manufacturing Group export brand, commits to a seven-year firmware update window on the WF-G family.